Miche Evo Max bottom bracket
$ 45.00
This is the bottom bracket required for the Miche Pistard 2.0 or Pistard Air crankset.
Available in 68mm English-threaded or 70mm Italian-threaded.
• lightweight 7075 aluminum cups & center sleeve
• sealed cartridge bearings
• 68mm English-threaded or 70mm Italian-threaded
• cups install using Park Tool BBT-19.2 or similar
• weight: 136g
An instruction manual is included with the crankset, but we're providing it here too because proper installation is critical.
Miche Pistard Air/Pistard 2.0 Installation Manual
If you break the included non drive-side compensator ring during installation or service (and you probably will because they break very easily), a 1mm bottom bracket cup spacer can be used in its place. Do not use this crankset without the compensator ring or spacer of equal thickness.
The installation manual shows the compensator ring being placed on the non-drive side cup, but it can safely be used on the drive side if you need a tiny bit of extra clearance. Doing this will reduce the crank arm clearance on the other side by 1mm, so be ready for that.